Manure scraper

The intelligent manure cleaning system is mainly composed of an electric control box, a driving motor, a scraper, a reversing wheel and a chain. Its working principle is that the motor drives the scraper to move back and forth through the chain. Each motor can drive multiple scrapers to operate simultaneously. The scraper can adapt to different widths of manure channels and can clean multiple manure channels. After a preset installation time, it will automatically clean the manure on the manure channels to the manure ditch.

Control performance: 

♦ 10-inch touch-controlled interactive interface; 

♦ Four-layer security protection; 

♦ Operates automatically according to the time set by the user; 

♦ Can be manually limited to operate at any time; 

♦ High-precision travel monitoring and setting; 

♦ Equipped with reverse rotation and overcurrent detection protection functions; 

♦ Equipped with fault alarm and automatic fault elimination functions; 

♦ Equipped with temperature monitoring and anti-freezing control functions; 

♦ Equipped with power-off memory and recovery operation functions;

Technical Specifications

♦ Variable-frequency motor: 1.5kw - 3.0kw; 

♦ Length of the manure channel: 0 - 400 meters; 

♦ Reducer: Hard-faced helical gear reducer, with an output speed of 5.4 revolutions per minute; 

♦ Scraper speed: 3 meters per minute; 

♦ Temperature range: -30℃ to 75℃ (The control box can adapt to extremely cold weather conditions).

Mechanical properties 

♦ Combined scraper: Height 21 cm; 

♦ Corner wheel: Wear-resistant ductile iron alloy, bearing steel shaft core, pure copper sleeve; Incorporates rolling pressure bearings, effectively protecting the guard and the shaft; 

♦ Drive wheel: Wear-resistant high-quality cast steel; 

♦ Chain: A 13-16 mm thick and hardened heavy chain that does not deform under a pulling force of 32 tons; 

♦ Overall hot-dip galvanizing.