Galvanized sheet tower | an efficient solution for feed storage on farms
Return to List
Product introduction
Galvanized plate tower is a common feed storage equipment in the breeding industry. With galvanized steel plate as the main material, it has good corrosion resistance and can effectively extend the service life of the tower. This kind of tower structure is usually relatively strong and stable, and can withstand a large load to ensure the safety of feed storage. Feed tower design facilitates automatic or manual feed extraction, improving feeding efficiency. In addition, due to the characteristics of galvanized materials, even in a wet or rainy environment, the tower can maintain good performance and prevent feed deterioration from moisture.
Qingdao Faemu galvanized sheet tower adopts double-sided zinc layer 275g/㎡ high zinc layer galvanized sheet, processed by automatic molding equipment, high precision, good assembly. The storage capacity ranges from 4.4m³ to 52.4m³, which can satisfy the storage of various capacities of feed in pig farms. In addition, sunscreen heat insulation coating can also be selected according to user needs to effectively maintain the nutrient content of the feed and prevent feed mildew due to high temperature.
Equipment parameter
Product Feature
Folding reinforcement
Upper and lower conical plate folding reinforcement: higher strength to ensure the straightness of the plate lap position; The edge of the plate is not easy to deform and improve the sealing.
Double row of clay strips
A row of cement strips on both sides of the bolt hole to better squeeze and fill the gap when the plate is bonded is the key to ensure good sealing.
Feed diverter
Standard proportioning tower at the bottom of the shunt, rotary streamline design, better to let the feed fall evenly, ensure the feed first-in-first-out, avoid arching.
Flanged drain edge design
The bottom of the coaming plate is designed to drain along and guide the water flow away from the material tower to further improve the waterproof performance of the material tower.
Technical specification
Double side average 275g/m2 high zinc layer, corrosion resistance, long life
Round head screws are used inside the lower cone plate to effectively avoid hanging materials
Translational open cover structure ensures 360 degree free feeding of the skip
The coaming plate and the lower cone plate are provided with observation holes for convenient viewing of the material level of the bin
Ladder non-slip design, safer
Project case