Fiberglass shell, integral molding, CAE fluid simulation design, low wind resistance, high energy efficiency, and corrosion resistance;

Split type composite material fan blades with stall limit design, effectively preventing motor overload, high efficiency, large air volume, and stable and reliable operation;

Direct drive transmission structure, high strength, and strong stability; DFA assembly design, simple and reliable, maintenance free;

Renowned domestic and foreign brand motors, imported brand bearings, high transmission efficiency, and guaranteed quality;

T-shaped louvers, combined with Airfoil wing shaped design louvers, effectively reduce wind resistance and improve ventilation and airtightness;

High strength hot-dip galvanized protective mesh, durable, corrosion-resistant, suitable for various high humidity and corrosive gas environments.

Fiberglass shell, integral molding, fluid simulation design, low wind resistance, high energy efficiency, and corrosion resistance;

Cast aluminum fan blades, high strength and corrosion resistance; Aerodynamic design, large air volume, high efficiency, smooth and reliable operation;

The fan specific motor has a protection level of IP55 and an insulation level of F, which can meet different working conditions;

High strength aluminum alloy bracket, good corrosion resistance, and stable operation of the entire machine;

Cast iron material pulley, high strength, wear-resistant, and long service life;

Spring loaded belt tensioning design, simple structure, improves transmission efficiency;

Imported brand bearings with oil injection holes for easy maintenance and upkeep;

T-shaped louvers with wing shaped design louvers effectively reduce wind resistance and improve ventilation and airtightness.

The fan casing is made of hot-dip galvanized sheet with a galvanized layer of 275g/㎡;

Fan specific motor, protection level IP55, insulation level F;

The fan blades are made of 430 stainless steel and have undergone dynamic balance correction, resulting in smooth operation, low vibration, and good overall stability;

The blinds are equipped with an automatic opening device, ensuring a 90 ° opening during operation;

The automatic opening device is nylon material which is specially made , and the guide rod is embedded with steel columns to ensure its service life; 

Imported brand belts with strong tensile strength.

Adopting a butterfly type opening and closing structure to increase the ventilation area, in line with the principles of aerodynamics;

Both sides air intake, and the ventilation is evenly distributed and reasonable to meet the breeding needs; 

The manual and automatic integrated control mode allows for easy opening even in the event of a power outage in the field; 

The AC810 environmental controller automatically controls and opens the appropriate angle according to on-site requirements;

Good ventilation performance, with a maximum air volume of 3600m at 20Pa ³/ H;

The appearance is simple, generous, economical, and practical, with high strength and good weather resistance.

It can be installed embedded or externally according to different sites, with uniform water output, reasonable structure, and no water leakage.

1. Adopting mainstream external water tank design, the tank structure meets the water supply demand, and there is no need to build a water tank on site;

2. Equipped with a filtered water circulation system, it has no vibration, no noise, and operates smoothly with low maintenance rates;

3. Closed water tank design to isolate external water pollution;