Fiberglass shell, integral molding, CAE fluid simulation design, low wind resistance, high energy efficiency, and corrosion resistance;

Split type composite material fan blades with stall limit design, effectively preventing motor overload, high efficiency, large air volume, and stable and reliable operation;

Direct drive transmission structure, high strength, and strong stability; DFA assembly design, simple and reliable, maintenance free;

Renowned domestic and foreign brand motors, imported brand bearings, high transmission efficiency, and guaranteed quality;

T-shaped louvers, combined with Airfoil wing shaped design louvers, effectively reduce wind resistance and improve ventilation and airtightness;

High strength hot-dip galvanized protective mesh, durable, corrosion-resistant, suitable for various high humidity and corrosive gas environments.

Fiberglass shell, integral molding, fluid simulation design, low wind resistance, high energy efficiency, and corrosion resistance;

Cast aluminum fan blades, high strength and corrosion resistance; Aerodynamic design, large air volume, high efficiency, smooth and reliable operation;

The fan specific motor has a protection level of IP55 and an insulation level of F, which can meet different working conditions;

High strength aluminum alloy bracket, good corrosion resistance, and stable operation of the entire machine;

Cast iron material pulley, high strength, wear-resistant, and long service life;

Spring loaded belt tensioning design, simple structure, improves transmission efficiency;

Imported brand bearings with oil injection holes for easy maintenance and upkeep;

T-shaped louvers with wing shaped design louvers effectively reduce wind resistance and improve ventilation and airtightness.

The fan casing is made of hot-dip galvanized sheet with a galvanized layer of 275g/㎡;

Fan specific motor, protection level IP55, insulation level F;

The fan blades are made of 430 stainless steel and have undergone dynamic balance correction, resulting in smooth operation, low vibration, and good overall stability;

The blinds are equipped with an automatic opening device, ensuring a 90 ° opening during operation;

The automatic opening device is nylon material which is specially made , and the guide rod is embedded with steel columns to ensure its service life; 

Imported brand belts with strong tensile strength.

The 28” roof fan adopts an integrated polyethylene shell, which is not affected by sunlight and frost. The product is not rusty, moisture resistant, acid and alkali resistant, has stronger corrosion resistance, and has a longer lifespan;

Designed based on the principles of aerodynamics, the fan operates smoothly, with low noise and strong stability, without the need for manual switching, and can effectively prevent air backflow;

The fan is installed at the roof opening, ensuring safe and reliable operation. It can strongly promote air flow and achieve ventilation and cooling effects.

Adopting a butterfly type opening and closing structure to increase the ventilation area, in line with the principles of aerodynamics;

Both sides air intake, and the ventilation is evenly distributed and reasonable to meet the breeding needs; 

The manual and automatic integrated control mode allows for easy opening even in the event of a power outage in the field; 

The AC810 environmental controller automatically controls and opens the appropriate angle according to on-site requirements;

Good ventilation performance, with a maximum air volume of 3600m at 20Pa ³/ H;

The second level air inlet equipment of the pigsty corridor is aesthetically pleasing and has superior practical performance;

The thickness of the louver board is 20mm, and it is easy to use and maintain with ABS insertion, with good insulation and sealing performance;

The AC810 intelligent environmental controller can control the electric push rod according to the temperature inside the building, automatically adjust the opening angle of the louvers to guide the incoming air.

High impact PS material form, firm and durable, installed in the ceiling of the pig house.

The fan Angle is automatically adjusted according to the number of fans opened.

The second level air inlet equipment of the pigsty corridor is used for summer air inlet;

The negative pressure automatically opens the air window, making it flexible and agile to open and close.

The second level air inlet equipment of the pigsty corridor is used for summer air inlet;

Choose a manual and automatic integrated driving system to adjust the vertical lifting of the sliding curtain panel and change the size of the air inlet.

New type of polymer double-sided coated plastic fabric with added antioxidant materials to increase its service life;

The control method of the roller shutter adopts a manual and automatic integrated driving method, which is convenient for users to use and maintain;

According to the size of the construction opening, the size of the roller shutter can be flexibly selected, and both sides are sealed with sealing cloth and equipped with windproof belts to prevent damage to the roller shutter cloth due to adverse winds.

New type of polymer double-sided coated plastic fabric with added antioxidant materials to increase its service life;

Adopting a manual and automatic integrated driving method, the height of the curtain can be adjusted to control the inlet air speed;

Configure counterweight pipes according to the size of the opening, which can be smoothly stacked when falling to prevent water storage problems during stacking;

Choose European style winches or self-control motors for traction and lifting. 

The appearance is simple, generous, economical, and practical, with high strength and good weather resistance.

It can be installed embedded or externally according to different sites, with uniform water output, reasonable structure, and no water leakage.

1. Adopting mainstream external water tank design, the tank structure meets the water supply demand, and there is no need to build a water tank on site;

2. Equipped with a filtered water circulation system, it has no vibration, no noise, and operates smoothly with low maintenance rates;

3. Closed water tank design to isolate external water pollution;

The control box shell is made of 304 stainless steel, the national standard wall thickness is 1.5mm;

Electrical components choose a line of big brands;

Leakage, phase loss, short circuit, overload protection;

Panel matte labeling;

Protection class IP54;

Large display screen;

Large number keyboard; 

4 temperature sensors; 

Two humidity sensors;

6 analog outputs; 

1 channel 4-20mA; 

3 EC fan interfaces; 

Two expansion interfaces;

3 pulse inputs 

3 potentiometers connected; 

8 relay outputs;

1 expansion bus interface;

4 digital DI input alarms;

1 alarm relay output; 

1 electrical detection switch;

IoT module;

Large display screen;

Large number keyboard;

4 temperature sensors;

3 channels (0-10V) analog output

2 expansion interfaces;

3 pulse inputs

2 potentiometers connected;

12 relay outputs;

1 expansion bus interface;

2 digital DI input alarms;

1 alarm relay output;

1 electrical detection switch;

IoT module;

Large display screen;

Large number keyboard;

7 temperature sensors;

2 humidity sensors;

4 channels (0-10V) analog output;

1 channel 4-20mA;

5 expansion interfaces;

3 pulse inputs

2 potentiometers connected;

22 relay outputs;

1 expansion bus interface;

4 digital DI input alarms;

1 alarm relay output;

1 electrical detection switch;

IoT module;

Power failure alarm;

Missing phase alarm;

Phase sequence error alarm;

High and low temperature alarm;

Alarm indication;

Can be connected to the alarm horn;

Start emergency fan at high temperature;

High temperature alarm;

High precision;

Power failure alarm;

Missing phase alarm;

Phase sequence error alarm;

Battery management;

Battery charging and discharging;

Power supply 380V and 220V can be converted;

Can be connected to the alarm horn;

Excellent performance, sturdy structure, V-shaped design;

High quality fluffy filter material with large dust capacity and good universal performance;

Filtering effect: G4 (EN779).

The box filter has a lightweight structure and is easy to install;

Various filter materials are available, including glass fiber, synthetic fiber, and nanocomposite fiber;

Efficient, low resistance, high dust tolerance, sturdy and moisture resistant, without static electricity, stable efficiency, and environmentally friendly;

The filtration efficiency can reach F9 (EN779).

The combination of primary and sub high efficiency filters effectively blocks pathogens;

Modular design, convenient for outdoor installation and maintenance and repair;

Perfect coordination with existing ventilation schemes, suitable for old factory renovation projects;

collocation with Indoor ventilation ducts can achieve uniform and accurate air supply.

275g/㎡ double-sided high zinc layer, corrosion resistant, and long service life;

The translational flip cover structure ensures that the feed cart can freely feed at 360 degrees;

The ring and lower cone plate are equipped with observation holes for easy viewing of the feed level in the silo;

Anti slip design for climbing stairs, safer.

High hardness, with a hard texture formed under vacuum assistance;

Good strength, with bending and tensile strengths reaching around 270-300Mpa;

Corrosion resistance, salt spray test can detect a service life of over 20 years;

Sealed well and sealed with UV resistant weather resistant adhesive.

Driver host

Stainless steel shell with a wall thickness of 1.5mm,

Equipped with Italian Transecno brand motor reducer, it operates more stably and has a longer lifespan.

The use of alloy cast aluminum main and driven wheels, with a reasonable tooth pitch design, makes the driving operation more stable and reduces noise.

Drive with junction box and equipped with limit protection for better protection of the drive.

The spring adopts high-strength tensile spring and is equipped with a spring handle, providing a good stroke protection for the drive, convenient maintenance and reducing maintenance frequency, with a longer service life.

Corner component

Stainless steel 304 shell with a wall thickness of 1.5mm, corrosion-resistant, suitable for both indoor and outdoor installation.

The inner wheel is made of ductile iron, which has stronger strength and prevents breakage.

Adopting double-sided sealed ball bearings, maintenance free, reducing operating resistance

The fasteners are all made of 304 stainless steel.

Chain-disk

High strength low-carbon alloy material chains have high tensile strength and low elongation.

The disc is made of nylon material, which has better wear resistance

The combination position of the chain and the disk is equipped with a double-sided wing shaped locking structure, which greatly improves the friction between the disk and the chain, ensuring that the disk does not slip and is reliable and stable for use;

The feed pipe adopts 275g/㎡ galvanized pipe with a wall thickness of 1.5mm, which has better corrosion resistance;

Feed pipes are connected by a large and small expansion head, making the chain-disk run more smoothly.

Mainly suitable for high-altitude feeding in factory areas, it meets the feed conveying requirements of pig farms while reducing costs;

The feed truck is not allowed to enter the factory to ensure biological safety;

Realize long-distance (200 meters) and high volume (5T/h)feed transportation, with high cost-effectiveness;

The structure is simple and reliable, with imported auger and transtecno motors, ensuring stable operation and low failure rate.;

Unidirectional conveying, no need to form a circuit, easy to install;

The conveying distance of a single feed line is 25m-100m, and long-distance transportation can be achieved through relay.

made of PP material with high transparency;

Stainless steel switch blade, making opening and closing more convenient;

Swivel out detachable lower outlet design for easy cleaning; 

Equipped with anti loss dosing cover, easy to operate; 

Bring a sow file folder for easy recording by the breeder.

Simple and reliable structure, high strength, stainless steel material, durable and corrosion-resistant;

The feeding speed can be adjusted in multiple levels to meet the feeding requirements at different stages; 

Feeding spaces are baffled to prevent pigs from competing for food, ensuring even feeding and reducing feed waste; 

The bottom is equipped with drainage holes for easy cleaning of the food trough.

Dry and wet feeding makes it easier for pigs to digest, and both powder and granular materials are suitable;

The barrel lid is equipped with reserved holes, which is better used in conjunction with an automatic feeding system;

The chassis is made of 304 stainless steel, which is durable and long-lasting;

Use the red knob on the cylinder wall to set the opening and closing of the feed chute and the size of the discharge volume.

Large arc design to avoid feed accumulation;

The bottom is high at the back and low at the front, making it convenient for pigs to eat;

Equipped with fixed holes to reduce protrusion of fixed parts and avoid injury to pigs.

Accurate weighing;

Long-term stability;

0 after-sales cost;

Remote viewing;

Remote calibration;

Easy installation and wiring;

No calibration;

Remote debugging;

Plastic slats for piglet prevent piglet abdomen from getting cold;

700mm height PVC panels have good insulation effect and easy cleaning and disinfection;

Hot dip galvanized U-shaped edge wrapped column, sturdy and durable;

Fiberglass insulation cover plate, aluminum insulation lamp, providing suitable environmental temperature for piglets.

Save space, reduce fighting, and facilitate management;

The front of the pen is high and the back is low, and the front of the grille is vertical and the back is horizontal, making it convenient for mating operations;

U-shaped rear door, upwards mounted for mating, reverse mounted for fecal cleaning, touch locker, easy to open and close;

Stainless steel long trough with large arc transition and no accumulated feed at the bottom.

The metal floor for sows is sturdy and durable, while the plastic floor for piglets prevents them from getting cold on the abdomen;

The width and length of the sow position can be adjusted to adapt to the body size of sows of different parity; 

Install anti pressure bars in the sow position to slow down the lying speed of sows and reduce crushing injuries to piglets;

Side mounted limit rods or isolation rakes for convenient feeding of piglets; 

PVC fence, good insulation effect, easy to clean and disinfect, integrated fence back door, convenient for pigs entry.

The whole plate is hot-dipped zinc, and the average thickness of the zinc layer is not less than 80μm;

Vertical grille of round pipe column, horizontal grille of round steel column, optional structure;

Outer frame, grille specifications, length, width and height can be customized, door lock structure, lock or latch optional;

The modular fencing system is easy to assemble.

Both sides are equipped with tightening devices to adapt to the width of the manure ditch;

Bottom PU strip design, adapt to the height of the manure ditch uneven;

Fully enclosed system, PE plug, EVA sealing ring;

ABS straight connector, with sand on the outer side of the upper end;

Optional diameters of 200mm, 250mm, and 315mm.

The water line dosing device is driven by hydrodynamic force for dosing, suitable for harsh water conditions without electricity, convenient maintenance, and can be added accurately during the water flow process; The proportion range can be adjusted, and medication can be added according to different situations to increase the accuracy of dosing; Can be directly installed at the water source inlet without affecting animal drinking water, etc.

The water line dosing device is driven by hydrodynamic force for dosing, suitable for harsh water conditions without electricity, convenient maintenance, and can be added accurately during the water flow process; The proportion range can be adjusted, and medication can be added according to different situations to increase the accuracy of dosing; Can be directly installed at the water source inlet without affecting animal drinking water, etc.

The pig water level controller is a specialized breeding equipment for pigs to drink water. The entire equipment is connected to a water level controller on top and a  φ21r stainless steel drain pipe below. The drain pipe is connected to a stainless steel drinking water tray that contains water. The workflow is to maintain a certain water level inside the stainless steel drinking water tray at all times. When the pig drinks, the water will automatically flow into the tray. After the pig finishes drinking, the water level inside the drinking water tray will still be maintained at a certain level, and if the pig drinks, the water inside will be clearly visible. During installation, only tap water needs to be connected without electricity, and the water level of the water tank is automatically controlled based on the principles of atmosphere and water pressure; The water level height can be adjusted as needed; Energy saving and environmental protection, easy installation, beautiful and elegant, durable and long-lasting; It is the preferred equipment for automatic drinking water devices in modern pig farms.

Pressure range: 0.25~0.3MPa, 

design flow rate: 3-4L/min 

Material: stainless steel 304 Ø 135mm 

Depth: 90mm 

Circular wall thickness: 1.0mm 

Weight: 393g

The pig water dispenser mainly consists of a valve body, valve core, sealing ring, return spring, plug cover, filter screen, etc. The valve body, valve core, spring, and filter are made of stainless steel material, and the plug cover is made of engineering plastic. The overall structure is simple, corrosion-resistant, reliable in operation, leak free, and has a long service life. When pigs drink water, the mouth contains a water dispenser, and the valve stem is bitten and pressed down. Water flows out from the gap between the valve core and the sealing ring and enters the pig's mouth. When the pig's mouth is loosened, the tension of the return spring is used to reset the valve stem, and the water outlet gap is closed. The water stops flowing out. The sealing performance of the pig's water dispenser is good, and the pressure decreases when the water flows out, resulting in a lower flow rate, which meets the requirements for pig drinking water.

Material: stainless steel 304 

Size: 350 * 220 * 100 

Wall thickness: 1.0mm

Material: stainless steel 304 

Size: 300 * 200 * 80 

Wall thickness: 1.0mm

Pressure range: 0.25~0.3MPa, 

design flow rate: 7-8L/min 

Material: stainless steel 304 Ø 215mm 

Depth: 195mm 

Circular wall thickness: 1.2mm 

Weight: 1230g

The pig water dispenser mainly consists of a valve body, valve core, sealing ring, return spring, plug cover, filter screen, etc. The valve body, valve core, spring, and filter are made of stainless steel material, and the plug cover is made of engineering plastic. The overall structure is simple, corrosion-resistant, reliable in operation, leak free, and has a long service life. When pigs drink water, the mouth contains a water dispenser, and the valve stem is bitten and pressed down. Water flows out from the gap between the valve core and the sealing ring and enters the pig's mouth. When the pig's mouth is loosened, the tension of the return spring is used to reset the valve stem, and the water outlet gap is closed. The water stops flowing out. The sealing performance of the pig's water dispenser is good, and the pressure decreases when the water flows out, resulting in a lower flow rate, which meets the requirements for pig drinking water.

Open, user-friendly, and simple;

Real time monitoring;

Power outage and network self recovery;

Support WIFI, broadband, 2G, 3G, 4G;

Support remote upgrade, remote recovery, and remote startup;

Support SMS, WeChat, and phone alarms;

4-way 485 and 2-way LAN;

24-hour detection of environmental controller operation data;

Unified interface between mobile phones and computers;

Video surveillance;

Real time alarm; 

Equipment management;

Alarm configuration;

Data traceability;

Data analysis;

User management;

Multi language switching.

The drinking water disinfection system uses physical and chemical methods to purify the drinking water source of pigs, which can effectively remove particles and bacteria in the water, and disinfect the drinking water pipeline. It can effectively reduce the diseases caused by drinking water and improve the biosafety of pig houses.

The filler is made of modified PP material, which is resistant to ultraviolet light and durable

Modular design, flexible application, easy and simple installation; ,

Good energy-saving technology, low operating costs;

It can be controlled by AC810 annulus.

The key parts are made of SUS304 material with strong corrosion resistance.

Aquaculture integrated sewage treatment system adopts international advanced biological treatment process, set to remove BOD5, COD, NH3-N in one, with stable and reliable technical performance, good treatment effect, investment, less land, easy maintenance and other characteristics. Our company can also carry out process design according to the specific water quality of customers, while supporting water reuse equipment.

The reclaimed water reuse system can recycle the reclaimed water discharged by the pig farm to meet the standard, which can effectively improve the utilization of water resources and reduce the water consumption of the pig farm. The system can be used again in pig farms after filtration and disinfection.

Feeder Annual Failure Rate: 0.3%, Multi-level Reliability Assurance Mechanisms:

Board-Level Protection:①Conformal coating (anti-corrosion)② Lightning surge protection③ Power & signal isolation ④Sensor safeguarding

Operation Modes: Smart Feeding → Batch Feeding

Offline Mode:Seamless operation matching online performance during network outages

Feeder Annual Failure Rate: 0.3%, Multi-level Reliability Assurance Mechanisms:

Board-Level Protection:①Conformal coating (anti-corrosion)② Lightning surge protection③ Power & signal isolation ④Sensor safeguarding

Operation Modes: Smart Feeding → Batch Feeding

Offline Mode:Seamless operation matching online performance during network outages

Feeder Annual Failure Rate: 0.3%, Multi-level Reliability Assurance Mechanisms:

Board-Level Protection:①Conformal coating (anti-corrosion)② Lightning surge protection③ Power & signal isolation ④Sensor safeguarding

Operation Modes: Smart Feeding → Batch Feeding

Offline Mode:Seamless operation matching online performance during network outages

Feeder Annual Failure Rate: 0.3%, Multi-level Reliability Assurance Mechanisms:

Board-Level Protection:①Conformal coating (anti-corrosion)② Lightning surge protection③ Power & signal isolation ④Sensor safeguarding

Operation Modes: Smart Feeding → Batch Feeding

Offline Mode:Seamless operation matching online performance during network outages

Reduce feed waste by 4-5%

Eliminate stress response from powder feed ingestion

Decrease swine diarrhea incidence rate

Improve feed conversion ratio (FCR)

Reduces feed waste by 4-5%

Avoids stress response from eating powdered feed after weaning

Decreases diarrhea incidence in piglets and improves survival rate

Enhances feed conversion ratio